Find Out Which Wood Router is Best For You Before You Purchase

The timber router is essential among woodworking tools since it adds decorative detail that enhances and defines the final appearance of your woodworking project. Used correctly, this instrument is to the woodworker what a nice paintbrush is to an artist. It's all in the details. The router is a versatile woodworking tool which may be used for many different tasks including rabbeting and sagemcom router login making dado grooves.

You will find four, fundamental types of timber routers on the market today:

laminate trimmers, lightweight or low-powered routers at the 7/8 to 1 1/2 HP range, medium-powered routers in the one and three-quarters to 2 and one-quarter HP variety and high-definition routers in the 3-4 HP range. Each has its own use and I have owned all of them at the same time. The laminate trimmers do exactly what their title suggests and other lightweight tasks like making hinge mortises. They are only acceptable for small router bits but they are easily maneuverable and match nicely right in your palm.

If you need more horsepower but still enjoy the ease of a lightweight router, then the 7/8 into 1/12 HP routers will probably do a fine job of spinning up router bits to some half-inch radius round-over bits. Every shop should have one of these handy for bench-top work.

They are somewhat small for router table use. Two and one-quarter HP woodworking routers have sufficient power to spin large router pieces through wood and yet they're still light enough to be manageable as bench-top wood routers. While any wood router over 2 HP can be used in a router table, I prefer the high powered ones for that program since there's absolutely no need to worry about how thick they are and you may also have as much power handy as you may need. The large horsepower is necessary to plunge large bits deep into timber to create mortises and so on.

If I could only afford one wood router, it would be the two and one-quarter HP variety since it is light enough for most bench-top operate and spectrum ubee router login can also be utilised in a router table. If I could manage two routers, then I would most likely have a 7/8 to 11/2 HP device for bench-top work and a 31/2 HP wood router under my router table. I don't enjoy mounting and dismounting routers beneath my router so using a lighter wood router hand close to the bench in any way times really speeds things up.