How Do You Build A Basic Bicycle Generator

A fundamental bicycle generator can be a really simple and enjoyable project for novices and amateurs to the world of inventions and electronics. In this guide, we'll describe two distinct types of generators. The first one is to get a pedal bike. It can be mounted onto the bicyclevolt.com bike wherever you go. Another is to get a stationary bike. With this one, it is simple to charge a battery or power a little TV.

Acquire a Motor - The initial step would be to get a DC motor for bicycle generator. This can be gotten from an old printer or computer. Motors exist in almost every electronic item. You can also go online and get a new engine for an inexpensive price. Once you've acquired or purchased an automobile, you need to take off o-rings and plastic gears.

Mount the Motor - The next step would be to mount the engine on the rear tire of the bike. You will also need to put a type of disk to the arm of the motor. This will let it touch the bike. It is almost always preferable to use big rubber disks as they provide good friction. The turning will lead to voltage to easily encounter the leads with this motor.

Basic Procedure for A Stationary Bicycle - First, let us talk about a stationary bike. If you are attempting to construct a stationary bicycle generator, then you will have to build a stand also. This will make sure your back tire is elevated. You should use a multimeter or voltmeter to measure the voltage your engine is producing when you are pedaling.

The next step is to attach a voltage regulator to the Ben Jones leads of the motor, reaching whatever gear you would like to charge or run. If you don't use a regulator, batteries can explode. For all those of you who don't understand, voltage regulators are little chips. They can be readily soldered onto a circuit. It's quite simple and easy to obtain a schematic for every single voltage regulator. You can get them in an electronics store or online.